Norbar products are manufactured in the factory in Banbury, England. The factory's ISO 9001 certification is key to providing good customer service worldwide.
0256
This Annular Transducer has been designed to fit directly to Norbar HT45 and PT4500 gearboxes, and will accurately measure the torque output via a display instrument.
Technical SpecificationWeight: 3.3 KgType: Reduced DiameterTemp Range Operating: -10°C to +50°CTemp Range Storage: -20°C to +70°CThermal Effect On Span: < +/- 0.03%/°CThermal Effect On Zero: < +/- 0.01%/°CMax Torsion Of Capacity: 150% of rated torqueTorsional Deflection: < 1°Fatigue: > 10 exp 7 cyclesFeaturesUp to 5000 N·m (5000 lbf·ft) classified to BS7882:2008, typically better than Class 1 for the primary classification range (+/-0.5% of reading).Designed to ignore non torsional forces.Robust heat treated alloy steel torsion tube design.'SMART' transducers can also be used with many instruments not of Norbar manufacture. However, these will operate as normal ratio calibrated (mV/V) transducers - the 'SMART' data will not be read. For non Norbar instruments or for when a mV/V certificate is required, use part code suffix '.IND'.'SMART' transducers have a built in memory circuit which contains essential information about the transducer. This information can be read by Norbar's 'Pro-Log' instrument meaning that when the transducer is connected, it is immediately recognised and ready to use. When ordering for a Pro-Log, use part code suffix '.LOG' (eg. 50659.LOG) if you require a torque units calibration certificate.
