Norbar products are manufactured in the factory in Banbury, England. The factory's ISO 9001 certification is key to providing good customer service worldwide.
0256
These Annular transducers are designed to fit directly to Norbar gearboxes in the '1500 Series' range (Pneutorque, Electrotorque and Handtorque) and will accurately measure the torque output via a display instrument.
Technical SpecificationWeight: 1.65 KgType: 72 diameter seriesTemp Range Operating: -10°C to +50°CTemp Range Storage: -20°C to +70°CThermal Effect On Span: < +/- 0.03%/°CThermal Effect On Zero: < +/- 0.01%/°CMax Torsion Of Capacity: 150% of rated torqueTorsional Deflection: < 1°Fatigue: > 10 exp 7 cyclesFeaturesDesigned to ignore non torsional forces.Classified to BS7882:2008, typically better than Class 1 for the primary classification range (+/-0.5% of reading).Robust heat treated alloy steel torsion tube design.Incorporates slip rings to ensure that the cable will not wrap around the tool during operation (not included in transducers for 'Remote' tools or Handtorque).'SMART' transducers have a built in memory circuit which contains essential information about the transducer. This information can be read by Norbar's 'Pro-Log' instrument meaning that when the transducer is connected, it is immediately recognised and ready for use. When ordering for a Pro-Log, use part code suffix '.LOG' (eg. 50659.LOG) if you require a torque units calibration certificate.'SMART' transducers can also be used with many instruments not of Norbar manufacture. However, these will operate as normal ratio calibrated (mV/V) transducers - the 'SMART' data will not be read. For non Norbar instruments or for when a mV/V certificate is required, use part code suffix '.IND'.
