Norbar products are manufactured in the factory in Banbury, England. The factory's ISO 9001 certification is key to providing good customer service worldwide.
0256
The accuracy and quality of the Norbar Static Torque Transducers has made them the first choice of many calibration laboratories throughout the world.
Technical SpecificationWeight: 1.6 KgTemp Range Operating: -10ºC to +50ºCTemp Range Storage: -20ºC to +70ºCThermal Effect On Span: < +/- 0.03% /ºCThermal Effect On Zero: < +/- 0.01% /ºCTorsional Deflection: < 1ºFatigue: > 10 exp 7 cyclesMaximum Torsion Capacity: 150%Connector: 6 Way Mil SpecDrive 1: 1" Male SquareDrive 2: 1" Female SquareFeaturesUp to 5000 N·m (5000 lbf·ft) classified to BS7882:2008, typically better than Class 1 for the primary classification range (+/-0.5% of reading).Robust, heat treated, alloy steel torsion shaft design.Designed to ignore non torsional forces.Operates in clockwise and anti-clockwise directions.Calibration up to 100,000 N·m with UKAS Certificate.Calibrated in clockwise direction as standard. Anti-clockwise calibration provided on request.'SMART' transducers have a built in memory circuit which contains essential information about the transducer. This information can be read by Norbar's 'Pro-Log' instrument meaning that when the transducer is connected, it is immediately recognised and ready for use. When ordering for a Pro-Log, use part code suffix '.LOG' (eg. 50659.LOG) if you require a torque units calibration certificate.'SMART' transducers can also be used with many instruments not of Norbar manufacture. However, these will operate as normal ratio calibrated (mV/V) transducers - the 'SMART' data will not be read. For non Norbar instruments or for when a mV/V certificate is required, use part code suffix '.IND'.
