One of the concerns in putting a torque tester into an environment where people are not calibration specialists is that incorrect selections will be made with the potential of incorrect tool setting and consequently joint failure.

These new TruCheck Models have been designed to calibrate Torque Screwdrivers and small Torque Wrenches up to 25 N·m.

There are two versions available, the 'TruCheck' being the most basic version, and the 'TruCheck Plus' having greater functionality, to offer more flexibility.

This TruCheck torque tester is ideal for checking Torque Screwdrivers. It comes with a single measurement unit, N.m. There is only one button on the device and that is to zero the display. Operation is simplicity itself and it is virtually impossible to go wrong!

TruCheck 3 N·m has an accuracy of +/-1% , +/-1 digit over the stated operating range and comes with a traceable calibration certificate.

This TruCheck torque tester is ideal for checking Torque Screwdrivers. It comes with a single measurement unit, N.m. There is only one button on the device and that is to zero the display. Operation is simplicity itself and it is virtually impossible to go wrong!

TruCheck 10 N·m has an accuracy of +/-1% , +/-1 digit over the stated operating range and comes with a traceable calibration certificate.
 

This TruCheck torque tester is ideal for checking Torque Screwdrivers and small Torque Wrenches. It comes with a single measurement unit, N.m. There is only one button on the device and that is to zero the display. Operation is simplicity itself and it is virtually impossible to go wrong!

TruCheck 25 N·m has an accuracy of +/-1% , +/-1 digit over the stated operating range and comes with a traceable calibration certificate.
 

As some customers require more flexibility than the basic TruCheck model, the 'Plus' adds a comprehensive range of features.

There are three torque units: N·m, lbf·ft and lbf·in.

TruCheck Plus also has a user selectable 'limit' feature. The operator sets the target torque and tolerance and the instrument will calculate whether the reading is within tolerance and indicate the results by illuminating one of three coloured LEDs: orange = low, green = ok, red = high.

TruCheck Plus has an RS-232 output and comes complete with an RS-232 cable. The reading measurement unit and limit status (Low, OK and High) are output via RS-232.

As some customers require more flexibility than the basic TruCheck model, the 'Plus' adds a comprehensive range of features.

There are three torque units: N·m, lbf·ft and lbf·in.

TruCheck Plus also has a user selectable 'limit' feature. The operator sets the target torque and tolerance and the instrument will calculate whether the reading is within tolerance and indicate the results by illuminating one of three coloured LEDs: orange = low, green = ok, red = high.

TruCheck Plus has an RS-232 output and comes complete with an RS-232 cable. The reading measurement unit and limit status (Low, OK and High) are output via RS-232.

As some customers require more flexibility than the basic TruCheck model, the 'Plus' adds a comprehensive range of features.

There are three torque units: N·m, lbf·ft and lbf·in.

TruCheck Plus also has a user selectable 'limit' feature. The operator sets the target torque and tolerance and the instrument will calculate whether the reading is within tolerance and indicate the results by illuminating one of three coloured LEDs: orange = low, green = ok, red = high.

TruCheck Plus has an RS-232 output and comes complete with an RS-232 cable. The reading measurement unit and limit status (Low, OK and High) are output via RS-232.